rebooting Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0_STABLE (GENERIC) #0: Sun Feb 7 02:09:14 CST 2010 sysop@plexor.technoskunk.fur:/d0/build/netbsd-4/obj/macppc/sys/arch/macppc/compile/GENERIC total memory = 256 MB avail memory = 240 MB timecounter: Timecounters tick every 10.000 msec userconf: configure system autoconfiguration: uc> exit Continuing... Found Heathrow at 0x80800000 Handling 64 interrupts mainbus0 (root) cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary) cpu0: HID0 8090c0a4, powersave: 1 cpu0: 233.33 MHz, no-parity 512KB WB L2 cache (PB SRAM) at 2:1 ratio grackle0 at mainbus0 pci0 at grackle0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40) obio0 at pci0 dev 16 function 0: addr 0x80800000 mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7 scsibus0 at mesh0: 8 targets, 8 luns per target zsc0 at obio0: irq 15,16 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 davbus at obio0 offset 0x14000 not configured fdc at obio0 offset 0x15000 not configured adb0 at obio0 offset 0x16000 irq 18: 0 targets aed0 at adb0 addr 0: ADB Event device wdc0 at obio0 offset 0x20000 irq 13: DMA transfer atabus0 at wdc0 channel 0 wdc1 at obio0 offset 0x21000 irq 14: DMA transfer atabus1 at wdc1 channel 0 bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:07:e8:fd lxtphy0 at bm0 phy 0: LXT970 10/100 media interface, rev. 1 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nvram0 at obio0 offset 0x60000 machfb0 at pci0 dev 18 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c) machfb0: 16 MB aperture at 0x81000000, 4 KB registers at 0x80881000 machfb0: 6144 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz mach64_get_mode: 1024 1040 1136 1312 768 769 772 800 machfb0: initial resolution 1024x768 at 8 bpp wsdisplay0 at machfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 ohci0 at pci0 dev 20 function 0: Opti 82C861 (rev. 0x10) ohci0: interrupting at irq 28 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 16666666 Hz quality 100 Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Unicomp Endura Keyboard, rev 1.10/2.15, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0: console keyboard, using wsdisplay0 uhub1 at uhub0 port 2 uhub1: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.10, addr 3 uhub1: 4 ports with 4 removable, self powered wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19623 MB, 39870 cyl, 16 head, 63 sec, 512 bytes/sect x 40188960 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 3, DMA mode 1 cd0(wdc1:0:0): using PIO mode 3, DMA mode 1 (using DMA) uhidev1 at uhub1 port 4 configuration 1 interface 0 uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 4, iclass 3/1 ums0 at uhidev1: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 boot device: bm0 root on bm0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.17.39 nfs_boot: my_domain=technoskunk.fur nfs_boot: my_addr=192.168.17.100 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=192.168.17.8 root on 192.168.17.39:/d0/diskless/bondi root file system type: nfs wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation) syncing disks... done unmounting file systems... done rebooting Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0_STABLE (GENERIC) #0: Sun Feb 7 02:09:14 CST 2010 sysop@plexor.technoskunk.fur:/d0/build/netbsd-4/obj/macppc/sys/arch/macppc/compile/GENERIC total memory = 256 MB avail memory = 240 MB timecounter: Timecounters tick every 10.000 msec userconf: configure system autoconfiguration: uc> disable machfb [178] machfb* disabled uc> exit Continuing... Found Heathrow at 0x80800000 Handling 64 interrupts mainbus0 (root) cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary) cpu0: HID0 8090c0a4, powersave: 1 cpu0: 233.33 MHz, no-parity 512KB WB L2 cache (PB SRAM) at 2:1 ratio grackle0 at mainbus0 pci0 at grackle0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40) obio0 at pci0 dev 16 function 0: addr 0x80800000 mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7 scsibus0 at mesh0: 8 targets, 8 luns per target zsc0 at obio0: irq 15,16 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 davbus at obio0 offset 0x14000 not configured fdc at obio0 offset 0x15000 not configured adb0 at obio0 offset 0x16000 irq 18: 0 targets aed0 at adb0 addr 0: ADB Event device wdc0 at obio0 offset 0x20000 irq 13: DMA transfer atabus0 at wdc0 channel 0 wdc1 at obio0 offset 0x21000 irq 14: DMA transfer atabus1 at wdc1 channel 0 bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:07:e8:fd lxtphy0 at bm0 phy 0: LXT970 10/100 media interface, rev. 1 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nvram0 at obio0 offset 0x60000 ofb0 at pci0 dev 18 function 0: ATI Technologies 3D Rage Pro ofb0: 1024 x 768, 8bpp wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation) wsmux1: connecting to wsdisplay0 ohci0 at pci0 dev 20 function 0: Opti 82C861 (rev. 0x10) ohci0: interrupting at irq 28 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 16666666 Hz quality 100 Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Unicomp Endura Keyboard, rev 1.10/2.15, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0: console keyboard, using wsdisplay0 uhub1 at uhub0 port 2 uhub1: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.10, addr 3 uhub1: 4 ports with 4 removable, self powered wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19623 MB, 39870 cyl, 16 head, 63 sec, 512 bytes/sect x 40188960 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 3, DMA mode 1 cd0(wdc1:0:0): using PIO mode 3, DMA mode 1 (using DMA) uhidev1 at uhub1 port 4 configuration 1 interface 0 uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 4, iclass 3/1 ums0 at uhidev1: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 boot device: bm0 root on bm0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.17.39 nfs_boot: my_domain=technoskunk.fur nfs_boot: my_addr=192.168.17.100 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=192.168.17.8 root on 192.168.17.39:/d0/diskless/bondi root file system type: nfs wsdisplay0: screen 1 added (std, vt100 emulation) wsdisplay0: screen 2 added (std, vt100 emulation) wsdisplay0: screen 3 added (std, vt100 emulation) wsdisplay0: screen 4 added (std, vt100 emulation) syncing disks... done unmounting file systems... done rebooting Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.0_STABLE (BONDI) #1: Wed Mar 10 20:29:59 CST 2010 sysop@plexor.technoskunk.fur:/d0/build/netbsd-4/obj/macppc/sys/arch/macppc/compile/BONDI total memory = 256 MB avail memory = 243 MB timecounter: Timecounters tick every 10.000 msec Found Heathrow at 0x80800000 Handling 64 interrupts mainbus0 (root) cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary) cpu0: HID0 8090c0a4, powersave: 1 cpu0: 233.33 MHz, no-parity 512KB WB L2 cache (PB SRAM) at 2:1 ratio grackle0 at mainbus0 pci0 at grackle0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40) obio0 at pci0 dev 16 function 0: addr 0x80800000 mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7 scsibus0 at mesh0: 8 targets, 8 luns per target zsc0 at obio0: irq 15,16 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 davbus at obio0 offset 0x14000 not configured fdc at obio0 offset 0x15000 not configured adb0 at obio0 offset 0x16000 irq 18: 0 targets aed0 at adb0 addr 0: ADB Event device wdc0 at obio0 offset 0x20000 irq 13: DMA transfer atabus0 at wdc0 channel 0 wdc1 at obio0 offset 0x21000 irq 14: DMA transfer atabus1 at wdc1 channel 0 bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:07:e8:fd lxtphy0 at bm0 phy 0: LXT970 10/100 media interface, rev. 1 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nvram0 at obio0 offset 0x60000 ofb0 at pci0 dev 18 function 0: ATI Technologies 3D Rage Pro ofb0: 1024 x 768, 8bpp wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation) wsmux1: connecting to wsdisplay0 ohci0 at pci0 dev 20 function 0: Opti 82C861 (rev. 0x10) ohci0: interrupting at irq 28 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 16666666 Hz quality 100 IPsec: Initialized Security Association Processing. scsibus0: waiting 2 seconds for devices to settle... uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Unicomp Endura Keyboard, rev 1.10/2.15, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0: console keyboard, using wsdisplay0 uhub1 at uhub0 port 2 uhub1: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.10, addr 3 uhub1: 4 ports with 4 removable, self powered wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19623 MB, 39870 cyl, 16 head, 63 sec, 512 bytes/sect x 40188960 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 3, DMA mode 1 cd0(wdc1:0:0): using PIO mode 3, DMA mode 1 (using DMA) uhidev1 at uhub1 port 4 configuration 1 interface 0 uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 4, iclass 3/1 ums0 at uhidev1: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 boot device: bm0 root on bm0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.17.39 nfs_boot: my_domain=technoskunk.fur nfs_boot: my_addr=192.168.17.100 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=192.168.17.8 root on 192.168.17.39:/d0/diskless/bondi root file system type: nfs wsdisplay0: screen 1 added (std, vt100 emulation) wsdisplay0: screen 2 added (std, vt100 emulation) wsdisplay0: screen 3 added (std, vt100 emulation) wsdisplay0: screen 4 added (std, vt100 emulation)