Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.24 (GENERIC) #10: Sat Mar 13 16:38:55 CST 2010 sysop@plexor.technoskunk.fur:/d0/build/current/obj/macppc/sys/arch/macppc/compile/GENERIC total memory = 256 MB avail memory = 239 MB timecounter: Timecounters tick every 10.000 msec userconf: configure system autoconfiguration: uc> disable atabus [ 77] atabus* disabled uc> exit Continuing... found heathrow PIC at 80800000 bootpath: /pci/mac-io/ethernet:0/netbsd mainbus0 (root) cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary) cpu0: HID0 0x8090c0a4, powersave: 1 cpu0: 233.33 MHz, no-parity 512KB WB L2 cache (PB SRAM) at 2:1 ratio memory0 at mainbus0 grackle0 at mainbus0 pci0 at grackle0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: Motorola MPC106 "Grackle" Host Bridge (rev. 0x40) pchb0: L2 cache: 256K, uniprocessor/none mode obio0 at pci0 dev 16 function 0: addr 0x80800000 mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7 scsibus0 at mesh0: 8 targets, 8 luns per target mesh0: couldn't establish power handler zsc0 at obio0 irq 15,16 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 davbus at obio0 offset 0x14000 not configured fdc at obio0 offset 0x15000 not configured cuda0 at obio0 offset 0x16000 irq 18 nadb0 at cuda0: Apple Desktop Bus iic0 at cuda0: I2C bus wdc0 at obio0 offset 0x20000 irq 13, edge triggered: DMA transfer atabus at wdc0 channel 0 not configured wdc1 at obio0 offset 0x21000 irq 14, edge triggered: DMA transfer atabus at wdc1 channel 0 not configured bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:07:e8:fd lxtphy0 at bm0 phy 0: LXT970 10/100 media interface, rev. 1 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nvram0 at obio0 offset 0x60000 machfb0 at pci0 dev 18 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c) machfb0: 16 MB aperture at 0x81000000, 4 KB registers at 0x80881000 machfb0: 6144 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz machfb0: initial resolution 1024x768 at 8 bpp wsdisplay0 at machfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 ohci0 at pci0 dev 20 function 0: Opti 82C861 (rev. 0x10) ohci0: interrupting at irq 28 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 biomask 80003fe netmask 80003fe ttymask 80003fe timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 16666666 Hz quality 100 scsibus0: waiting 2 seconds for devices to settle... uhub0 at usb0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Unicomp Endura Keyboard, rev 1.10/2.15, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhub1 at uhub0 port 2: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.10, addr 3 uhub1: 4 ports with 4 removable, self powered uhidev1 at uhub1 port 4 configuration 1 interface 0 uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 4, iclass 3/1 ums0 at uhidev1: 3 buttons and Z dir wsmouse0 at ums0 mux 0 Kernelized RAIDframe activated boot device: bm0 root on bm0 nfs_boot: trying DHCP/BOOTP nfs_boot: DHCP next-server: 192.168.17.39 nfs_boot: my_domain=technoskunk.fur nfs_boot: my_addr=192.168.17.100 nfs_boot: my_mask=255.255.255.0 nfs_boot: gateway=192.168.17.8 root on 192.168.17.39:/d0/diskless/bondi root file system type: nfs wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation)