Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.37 (SHADOW) #2: Tue Jul 27 13:04:22 CDT 2010 sysop@shadow.bozonet.ntc:/d0/nbsd/current/obj/i386/sys/arch/i386/compile/SHADOW total memory = 3067 MB avail memory = 3008 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 ( ) mainbus0 (root) ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBFD5BF40/0x00000000BFD60F40, using 32 (20100528/tbfadt-586) cpu0 at mainbus0 apid 0: Intel 686-class, 2600MHz, id 0x1067a cpu0: Intel(R) On Demand Clock Modulation (state disabled) cpu1 at mainbus0 apid 1: Intel 686-class, 2600MHz, id 0x1067a ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20100528 acpi0: X/RSDT: OemId < INTEL, DG41TY,0000001f>, AslId acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU4 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU5 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU6 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU7 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU8 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured MCH (PNP0C01) at acpi0 not configured SBRS (PNP0C02) at acpi0 not configured SIO1 (PNP0C02) at acpi0 not configured pckbc0 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 fdc0 at acpi0 (FDC, PNP0700): io 0x3f0-0x3f5,0x3f7 irq 6 drq 2 com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4 com0: ns16550a, working fifo lpt0 at acpi0 (LPTE, PNP0401): io 0x378-0x37f,0x778-0x77f irq 5 drq 3 attimer0 at acpi0 (TMR, PNP0100): io 0x40-0x43 pcppi0 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 sysbeep0 at pcppi0 RMSC (PNP0C02) at acpi0 not configured npx0 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13 npx0: reported by CPUID; using exception 16 hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8 timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button RMEM (PNP0C01) at acpi0 not configured OMSC (PNP0C02) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer0: attached to pcppi0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: Intel 82G41 Host Bridge (rev. 0x03) agp0 at pchb0: can't find internal VGA device config space ppb0 at pci0 dev 1 function 0: Intel product 0x2e31 (rev. 0x03) ppb0: unsupported PCI Express version pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok vga0 at pci1 dev 0 function 0: ATI Technologies product 0x954f (rev. 0x00) vga0: WARNING: ignoring 64-bit BAR @ 0x10 vga0: WARNING: ignoring 64-bit BAR @ 0x18 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 radeondrm0 at vga0: ATI Radeon HD 4350 radeondrm0: Initialized radeon 1.29.0 20080613 hdaudio0 at pci1 dev 0 function 1: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 17 hdafg0 at hdaudio0 vendor 0x1002 product 0xAA01 nid 0x01 (firmware configuration) hdafg0: DAC0:02, Digital Digital Other Out: Jack (Unknown, 03) hdafg0: 2ch/0ch 32000Hz-48000Hz 16/16 audio0 at hdafg0: half duplex, playback hdaudio1 at pci0 dev 27 function 0: HD Audio Controller hdaudio1: interrupting at ioapic0 pin 16 hdafg1 at hdaudio1 vendor 0x10EC product 0x0888 nid 0x01 (firmware configuration) hdafg1: DAC0:02, Analog Speaker: Jack (Green, 14) hdafg1: DAC1:03, Analog HP Out: Jack (Green, 1B) hdafg1: DAC2:06, Digital SPDIF Out: Fixed Function (Unknown, 1E) hdafg1: ADC3:08, Analog Mic In: Jack (Pink, 18) hdafg1: ADC3:08, Analog Line In: Jack (Blue, 1A) hdafg1: ADC4:09, Analog Mic In: Jack (Pink, 19) hdafg1: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32 audio1 at hdafg1: full duplex, playback, capture, independent ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x01) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03) re0: interrupting at ioapic0 pin 17 re0: Ethernet address 00:1c:c0:ea:c7:9f re0: using 256 tx descriptors rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xe1) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled fwohci0 at pci4 dev 0 function 0: Texas Instruments TSB12LV26 IEEE 1394 Host Controller (rev. 0x00) fwohci0: interrupting at ioapic0 pin 17 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:10:b5:00:00:08:91:19 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset ichlpcib0 at pci0 dev 31 function 0: Intel 82801GB/GR LPC Interface Bridge (rev. 0x01) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. ichlpcib0: HPET window not mapped, skipping piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01) piixide1: bus-master DMA support present piixide1: primary channel configured to native-PCI mode piixide1: using ioapic0 pin 19 for native-PCI interrupt atabus1 at piixide1 channel 0 piixide1: secondary channel configured to native-PCI mode atabus2 at piixide1 channel 1 ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x01) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus spdmem0 at iic0 addr 0x50 spdmem0: DDR2 SDRAM, no parity or ECC, 2GB, 800MHz (PC2-6400) spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 6-6-6-18 spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing) spdmem1 at iic0 addr 0x51 spdmem1: DDR2 SDRAM, no parity or ECC, 2GB, 800MHz (PC2-6400) spdmem1: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time spdmem1: tAA-tRCD-tRP-tRAS: 6-6-6-18 spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing) isa0 at ichlpcib0 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered IPsec: Initialized Security Association Processing. wd0 at atabus1 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) ulpt0 at uhub2 port 2 configuration 1 interface 0 ulpt0: HewLett Packard HP LaserJet 2200, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode atapibus0 at atabus2: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) cd0(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)