> boot /netbsd-GENERIC.pae -1s 9533556+542400+554972 [500672+487062]=0xb167ac Loading /stand/i386/5.99.38/modules/miiverbose/miiverbose.kmod Loading /stand/i386/5.99.38/modules/pciverbose/pciverbose.kmod Loading /stand/i386/5.99.38/modules/scsiverbose/scsiverbose.kmod Loading /stand/i386/5.99.38/modules/usbverbose/usbverbose.kmod Loading /stand/i386/5.99.38/modules/ffs/ffs.kmod Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.38 (GENERIC_PAE) #1: Thu Jul 29 13:08:35 CDT 2010 sysop@shadow.bozonet.ntc:/d0/nbsd/current/obj/i386/sys/arch/i386/compile/GENERIC_PAE total memory = 4091 MB avail memory = 4005 MB mainbus0 (root) ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBFD5BF40/0x00000000BFD60F40, using 32 (20100528/tbfadt-586) cpu0 at mainbus0 apid 0: Intel 686-class, 2600MHz, id 0x1067a cpu1 at mainbus0 apid 1: multiprocessor boot disabled ioapic0 at mainbus0 apid 4 acpi0 at mainbus0: Intel ACPICA 20100528 CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU4 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU5 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU6 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU7 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured CPU8 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured MCH (PNP0C01) at acpi0 not configured SBRS (PNP0C02) at acpi0 not configured SIO1 (PNP0C02) at acpi0 not configured pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 FDC (PNP0700) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured LPTE (PNP0401) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 RMSC (PNP0C02) at acpi0 not configured npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13 hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button RMEM (PNP0C01) at acpi0 not configured OMSC (PNP0C02) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: Intel 82G41 Host Bridge (rev. 0x03) agp0 at pchb0: can't find internal VGA device config space ppb0 at pci0 dev 1 function 0: Intel product 0x2e31 (rev. 0x03) ppb0: unsupported PCI Express version pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0: ATI Technologies product 0x954f (rev. 0x00) vga1: WARNING: ignoring 64-bit BAR @ 0x10 vga1: WARNING: ignoring 64-bit BAR @ 0x18 wsdisplay0 at vga1 kbdmux 1 radeondrm0 at vga1: ATI Radeon HD 4350 radeondrm0: Initialized radeon 1.29.0 20080613 hdaudio0 at pci1 dev 0 function 1: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 17 hdafg0 at hdaudio0 vendor 0x1002 product 0xAA01 nid 0x01 (firmware configuration) hdafg0: DAC0:02, Digital Digital Other Out: Jack (Unknown, 03) hdafg0: 2ch/0ch 32000Hz-48000Hz 16/16 audio0 at hdafg0: half duplex, playback hdaudio1 at pci0 dev 27 function 0: HD Audio Controller hdaudio1: interrupting at ioapic0 pin 16 hdafg1 at hdaudio1 vendor 0x10EC product 0x0888 nid 0x01 (firmware configuration) hdafg1: DAC0:02, Analog Speaker: Jack (Green, 14) hdafg1: DAC1:03, Analog HP Out: Jack (Green, 1B) hdafg1: DAC2:06, Digital SPDIF Out: Fixed Function (Unknown, 1E) hdafg1: ADC3:08, Analog Mic In: Jack (Pink, 18) hdafg1: ADC3:08, Analog Line In: Jack (Blue, 1A) hdafg1: ADC4:09, Analog Mic In: Jack (Pink, 19) hdafg1: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32 audio1 at hdafg1: full duplex, playback, capture, independent ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x01) pci3 at ppb2 bus 3 re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03) re0: interrupting at ioapic0 pin 17 re0: Ethernet address 00:1c:c0:ea:c7:9f rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xe1) pci4 at ppb3 bus 4 fwohci0 at pci4 dev 0 function 0: Texas Instruments TSB12LV26 IEEE 1394 Host Controller (rev. 0x00) fwohci0: interrupting at ioapic0 pin 17 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:10:b5:00:00:08:91:19 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset ichlpcib0 at pci0 dev 31 function 0: Intel 82801GB/GR LPC Interface Bridge (rev. 0x01) ichlpcib0: 24-bit timer gpiobus at ichlpcib0 not configured piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel ignored (disabled) piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01) piixide1: using ioapic0 pin 19 for native-PCI interrupt atabus1 at piixide1 channel 0 atabus2 at piixide1 channel 1 ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x01) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4 at usb4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 wd0 at atabus1 drive 0: wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors ulpt0 at uhub2 port 2 configuration 1 interface 0 ulpt0: HewLett Packard HP LaserJet 2200, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode atapibus0 at atabus2: 2 targets cd0 at atapibus0 drive 0: cdrom removable Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs Enter pathname of shell or RETURN for /bin/sh: We recommend that you create a non-root account and use su(1) for root access. # # # exit Thu Jul 29 18:36:13 GMT 2010 Starting root file system check: /dev/rwd0a: file system is clean; not checking swapctl: setting dump device to /dev/wd0b swapctl: adding /dev/wd0b as swap device at priority 0 Starting file system checks: /dev/rwd0e: file system is clean; not checking /dev/rwd0f: file system is clean; not checking /dev/rwd0g: file system is clean; not checking /dev/rwd0h: file system is clean; not checking Setting tty flags. /etc/rc: ERROR: This script should only be executed at boot time. /etc/rc.d/pf_boot exited with code 1 Setting sysctl variables: ddb.onpanic: 1 -> 0 net.inet6.ip6.v6only: 1 -> 0 Starting network. Hostname: shadow.bozonet.ntc IPv6 mode: host Configuring network interfaces: re0. Adding interface aliases:. add net default: gateway artychoke.bozonet.ntc Enabling pf firewall. Building databases: dev, utmp, utmpx, services done Starting syslogd. Starting named. Starting rpcbind. Mounting all filesystems... Clearing temporary files. Starting amd. Jul 29 13:36:19 shadow amd[248]/warn: getnetbyaddr failed on 0xc0a8fb00, succeeded on 0xc0a8fb uvm_fault(0xd06425cc, 0, 1) -> 0xe fatal page fault in supervisor mode trap type 6 code 0 eip c0696aab cs 8 eflags 10296 cr2 62 ilevel 0 panic: trap cpu0: Begin traceback... uvm_fault(0xd06425cc, 0, 1) -> 0xe fatal page fault in supervisor mode trap type 6 code 0 eip c024a130 cs 8 eflags 10246 cr2 6 ilevel 0 Skipping crash dump on recursive panic panic: trap Faulted in mid-traceback; aborting...rebooting...